Kent Manual Precision 16" x 40" Lathe - RML-1640V
- Induction hardened & precision ground gears.
- Quick feed reversal knob allows instant feed reversal without stopping the main motor.
- Safety clutch disengages feed when overloaded.
- Jog button for effortless spindle speed changes.
- One-shot pump conveniently lubricates bed and cross slide ways.
- Safety full-length foot brake.
- AC-frequency drive with infinitely variable speed control and digital RPM display. (V-models)
- T-slots on cross slide for mounting optional attachments. (TRL and RML-series)
- Large 3.125" spindle through bore and a 2-speed tail stock.(ML-series)
- 5 HP main spindle motor
- 36-1800, 12 steps spindle speeds
- Hardened and ground gears and bedways
- Cast iron machine bedways with full one piece cast base and front loading chip tray for easier cleaning
- Foot brake and T-Slot compound Inch/metric reading on dials
- Inch/metric ruler on tailstock quill
- ISO 9001 certified manufacturer
Standard Accessories:
- 3-jaw chuck (9″)
- Steady rest
- Follow rest
- 4-position tool post
- Coolant system
- Full-length splash guard
- Worklight
- Chuck cover
- Thread chasing dial
- Toolbox with standard tools
| Model No. | RML-1640V |
| Swing Over Bedways | 16.2" |
| Swing Over Cross Slide | 10.39" |
| Swing Over Gap | 23" |
| Gap Length w/Face Plate | 4.5" |
| Distance Between Centers | 40" |
| Spindle Through Hole | 2.06" |
| Spindle Nose Camlock | D 1-6 |
| Spindle to Sleeve Taper | MT#6 to #4 |
| Spindle Speeds | 12 Steps, 36-1800 RPM |
| Spindle Speeds V-Models | Variable (2 Ranges) 20-400-2500 RPM |
| Bed Width | 10.25" (260) |
| Cross Slide | 19" x 6" (w/T-slots) |
| Cross Slide Travel | 9.25" (235) |
| Compound Travel | 5" (127) |
| Thread Capacity Inch | (45) 2 to 72 TPI |
| Thread Capacity Metric | (39) 0.2 to 14mm |
| Modular Capacity | (18) 0.3 to 3.5 |
| Diametrical Pitch Range | (21) 8 to 44 |
| Longitudinal Feeds | (17) 0.002 to 0.067 in/Rev |
| Cross Feeds | (17) 0.001 to 0.034 in/Rev |
| Quill Diameter | 2" (51) |
| Quill Taper | MT#4 |
| Quill Travel | 6.5" (165) |
| Spindle Main Motor | 5 HP |
| Control Circuit Voltage | 24 V |
| Shipping Dimensions | 87" x 42" x 66" |
| Weight | 4000 lbs. |
Kent Manual Precision 16" x 40" Lathe
