Kent Manual Precision Lathe 20" x 60" - ML-2060

Brand:

(No reviews yet) Write a Review
SKU:
ML-2060

Kent USA

 Kent Manual Precision 20" x 60" Lathe - ML-2060

  • Induction hardened & precision ground gears.
  • Quick feed reversal knob allows instant feed reversal without stopping the main motor.
  • Safety clutch disengages feed when overloaded.
  • Jog button for effortless spindle speed changes.
  • One-shot pump conveniently lubricates bed and cross slide ways.
  • Safety full-length foot brake.
  • AC-frequency drive with infinitely variable speed control and digital RPM display. (V-models)
  • T-slots on cross slide for mounting optional attachments. (TRL and RML-series)
  • Large 3.125" spindle through bore and a 2-speed tail stock.(ML-series)
  • 7.5 HP Spindle Motor, 12-Speeds
  • 3.125” Spindle Through Hole
  • Solid Full Length Casting Base with Front Loading Chip Tray for Easier Cleaning
  • Adjustable Over-load Feed Clutches
  • Quick Reversal Feed from Apron
  • Full-length Safety Foot Brake
  • Spindle Jog Button Control
  • One-shot Lubrication for Apron, Carriage, and Bed Ways
  • Multi-position Adjustable Feed Position Stops
  • Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
  • Dual Inch/Metric Dials with Quick-change Sleeve

Standard Accessories:

  • 3-jaw chuck
  • Steady rest
  • Follow rest
  • Coolant system
  • Full-length splash guard
  • Worklight
  • Chuck cover
  • Thread chasing dial
  • Toolbox with standard tools
  • 3-position carriage stop
  • Bed mount carriage stop
Model No. ML-2060
 Swing Over Bedways  20"
 Swing Over Cross Slide  14"
 Swing Over Gap  27.5"
 Gap Length w/Face Plate  8"
 Distance Between Centers  57"
 Spindle Through Hole  3.13"
 Spindle Nose Camlock  D 1-6
 Spindle to Sleeve Taper  MT#7 to #4
 Spindle Speeds  12 Steps, 36-1800 RPM
 Spindle Speeds V-Models  N/A
 Bed Width  12"
 Cross Slide  24" x 7.25"
 Cross Slide travel  12"
 Compound Travel  5.75"
 Thread Capacity Inch  (45) 2 to 72 TPI
 Thread Capacity Metric  (39) 0.2 to 14mm
 Modular Capacity  (18) 0.3 to 3.5
 Diametrical Pitch Range  (21) 8 to 44
 Longitudinal Feeds  (15) 0.0015 to 0.04 in/Rev
 Cross Feeds  (15) 0.00075 to 0.02 in/Rev
 Quill Diameter  2.3"
 Quill Taper  MT#4
 Quill Travel  5.5"
 Spindle Main Motor  7.5 HP
 Control Circuit Voltage  24 V
 Shipping Dimensions  108" x 42" x 66"
 Weight  5400 lbs.
Kent Manual Precision 20" x 60" Lathe