K.O. Lee Universal Tool & Cutter Grinder 5-5/16” x 45” Surface - KOL60M

Brand:

(No reviews yet) Write a Review
SKU:
KOL60M

k.o.-lee-logo.jpg

K.O. Lee Universal Tool & Cutter Grinder 5-5/16” x 45” Surface - KOL60M

WHEELHEAD: The wheelhead is designed so that it can be tilted easily to ± 15 degrees. It can
be swiveled 360 degrees on the horizontal plane. Both of these features make it easy to set rake and relief angles.

GRINDING WHEEL SPINDLE ASSEMBLY: The spindle assembly is designed so that the spindle shaft is supported by two pairs of angular ball bearings; i.e. one pair at each end of the spindle support. The spindle is grease lubricated for life and no additional lubrication is
required.

UNIVERSAL WORKHEAD: The workhead can be positioned on the table as desired by the operator and can be swiveled accurately at any horizontal and vertical angle. It has a taper hole in each end of the spindle; i.e. NT#50 / MT5.

TABLE: In order to machine various grinding requirements, the table can be easily controlled
from fine to rapid feed range. The table feed mechanism is designed to be controlled by finger tip action. The spring cushioned table dogs are used for both positioning the table as well as absorbing table return traverse shock. The table ways are hardened, ground and anti-friction bearings are used. It swivels 120 degrees.

TAILSTOCK: The right and left tailstocks can be easily positioned any place on the table. The right tailstock has a retractable center for easy mounting and is mounting of the workpiece.

LUBRICATION: The machine has a centralized lubrication system.

Features:

  • Right and Left Hand Tailstock
  • Diamond Dresser Holder
  • Wheel Guards with Holders
  • Center Gauge
  • Rests with Holders and Blades
  • Lockable Main Disconnect Switch
  • Reducing Collets
  • Grinding Wheels Seven Sizes
  • Center Gauge
  • Centralized Lubrication System
  • Wrench Assortment

Optional Equipment:

  • Radius Grinding
  • Face Mill Grinding
  • Helical Grinding
  • Motorized Workhead
  • Internal Grinding
  • Micro Feed for Cross Feed
  • External Grinding Wheel Spindle
  • Surface Grinding
  • Drill Point
  • Lathe and Planner Tool Grinding
  • Dust Collector
  • Wet Grinding with Splash Plate

Specifications:

kol40m-table.jpg

For More K.O. Lee Universal Tool & Cutter Grinders Click Here

K.O. Lee Universal Tool & Cutter Grinder 5-5/16” x 45” Surface