Kent CNC Knee Mill with MILLPWR G2 Control, 12" x 50" 3HP, 2-Axis - KTM-4VKF-2

Brand:

(No reviews yet) Write a Review
SKU:
KTM-4VKF-2

Kent USA

Kent CNC Knee Mill with MILLPWR G2 Control, 12" x 50" 3HP, 2-Axis - KTM-4VKF-2


Designed for high-precision milling of the same part, Kent USA CNC Knee Mills are built to last on heavy-duty, solid foundations. Kent USA CNC Knee Mills are standard equipped with Acu-Rite MillPwr G2. This CNC control can be used as a full function DRO, an intelligent power feed or a programmable CNC.


This versatile system allows the operator to switch from full automatic mode to manual mode in just seconds. Import and run G-Code files from CAD/CAM programs to machine full 3D contoured parts. With optional spindle control, you can automatically control your spindle’s speed and/or direction on milling machines that are equipped with an electronic variable speed spindle.


Features:

  • 3 HP AC-Freq drive head with digital RPM display and analog load meter. Automatic spindle direction reversal when switching between high and low speed gear ranges
  • 12” x 50” hardened and ground table top
  • 60-550-4500 spindle RPM (Hi/Low gear)
  • Automatic centralized lubrication system with metered check-valves
  • Single-phase or 3-phase power without the need for a phase converter
  • Hardened and Ground (Hrc-52) table surface and all slide ways
  • Solid box ways on saddle and column
  • Easy conversational programming, DRO-mode allows for full manual operations with built-in 3 axis absolute encoder glass scales
  • Engraving feature and DXF file import capability, USB drive and 12.1” high resolution flat panel color LCD display


Optional Accessories:

  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • Flood Coolant System
  • Chip Pan
  • Riser Block
  • Angle-Lock Vise
  • Rustlick Coolant



Specifications:

Model KTM-4VKF-2
Table Size 12" x 50"
Table Travel (X-Axis) 30"
Saddle Travel (Y-Axis) 17"
Knee Travel (Z-Axis) 17.25"
Quill Travel 4" w/ MillPwr3 G2 CNC Control
Ram Travel 22"
Spindle Motor 3 HP
Spindle Speed AC Frequency Drive Head 60-550-4500 RPM
Spindle Taper R-8
Quill Diameter 3.375"
Quill Feed Rate 0.0015" / 0.003" / 0.006" in/rev
Drilling Capacity (Manual / Power) 0.75" / 0.37" diameter
Boring Capacity 6" diameter
Milling Capacity 2.0 in³/min
Maximum Work Load (Center) 850 lbs
Spindle Nose to Table Surface 2.75" - 17.75"
Spindle Center to Column 5" - 27"
Net Weight 3400 lbs
Gross Weight 3600 lbs
Shipping Dimensions 72" x 72" (skid)
Power Requirements 220v, 3 phase, 60 Hz, 10 Amp
(optional 440v power requires 5A)
110v dedicated for CNC control, 20 Amp

For More Kent CNC Knee Mills with MILLPWR G2 Controls Click Here

Kent CNC Knee Mill with MILLPWR G2 Control, 12" x 50" 3HP, 2-Axis