Kent CNC Knee Mill with MILLPWR G2 Control, 10" x 50" - KTM-3VKF

Brand:

(No reviews yet) Write a Review
SKU:
KTM-3VKF

Kent USA

Kent CNC Knee Mill with MILLPWR G2 Control, 10" x 50" - KTM-3VKF


Designed for high-precision milling of the same part, Kent USA CNC Knee Mills are built to last on heavy-duty, solid foundations. Kent USA CNC Knee Mills are standard equipped with Acu-Rite MillPwr G2. This CNC control can be used as a full function DRO, an intelligent power feed or a programmable CNC.


This versatile system allows the operator to switch from full automatic mode to manual mode in just seconds. Import and run G-Code files from CAD/CAM programs to machine full 3D contoured parts. With optional spindle control, you can automatically control your spindle’s speed and/or direction on milling machines that are equipped with an electronic variable speed spindle.


Features:

  • 3 HP spindle motor with AC-Frequency drive, digital RPM display, load meter, and automatic spindle direction reversal when switching between high and low speed gear ranges. Can run on either single phase or 3 phase power.
  • 10" x 50" (Opt. 10" x 54") hardened and ground table top
  • Table, saddle, and knee with hardened and ground dovetail ways
  • Precision ground leadscrews with backlash compensating double nut
  • Precision bored and ground milling head, with super precision ABEC-7 bearings
  • Meehanite castings, with built in coolant reservoir in machine base
  • Centralized one-shot lubrication, with metered check-valves
  • Easy conversational programming, DRO-mode allows for full manual operations with built-in 3 axis absolute encoder glass scales
  • Engraving feature and DXF file import capability, USB drive and 12.1” high resolution flat panel color LCD display


Optional Accessories:

  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • Flood Coolant System
  • Chip Pan
  • Riser Block
  • Angle-Lock Vise
  • Rustlick Coolant



Specifications:

Model KTM-3VKF
Table Size 10" x 50" (Opt. 10" x 54")
Table Travel (X-Axis) 32"
Saddle Travel (Y-Axis) 14"
Knee Travel (Z-Axis) 15"
Quill Travel 4" w/ MillPwr3 G2 CNC Control
Ram Travel 22"
Spindle Motor 3 HP
Spindle Speed AC Frequency Drive Head 60-550-4500 RPM
Spindle Taper R-8
Quill Diameter 3.375"
Quill Feed Rate 0.0015" / 0.003" / 0.006" in/rev
Drilling Capacity (Manual / Power) 0.75" / 0.37" diameter
Boring Capacity 6" diameter
Milling Capacity 2.0 in³/min
Maximum Work Load (Center) 850 lbs
Spindle Nose to Table Surface 2.75" - 17.75"
Spindle Center to Column 5" - 27"
Net Weight 3100 lbs
Gross Weight 3300 lbs
Shipping Dimensions 72" x 72" (skid)
Power Requirements 220v, 3 phase, 60 Hz, 10 Amp
(optional 440v power requires 5A)
but can also accept 220v, 1-phase
power (15A) without a phase converter,
ideal for customers with only 1-phase power
CNC Knee Mill with MILLPWR G2 Control, 10" x 50"