Baileigh PR-10500-4NC Numerically Controlled Four Roll Plate Bending Machine - BA9-1008521

Brand:

(No reviews yet) Write a Review
SKU:
BA9-1008521

Baileigh

Baileigh PR-10500-4NC Numerically Controlled Four Roll Plate Bending Machine - BA9-1008521

This numerically controlled four-roll plate roll features a moveable console with a 3-axis touchscreen panel. Its hydraulic motors drive planetary gearboxes for accuracy.

  • Made in Italy and refined through years of extensive research.
  • 1/2" mild steel capacity.
  • 120" (10-foot) length.
  • Large 10 hp motor runs on 480-volt 3-phase power.

FORMING ROLLS AND HYDRAULICS

  • All 4 forming rolls are hardened and polished.
  • 2 central driven rolls.
  • Dual hydraulic motors and high-efficiency planetary gearboxes directly rotate the 2 driven rolls.
  • 4-roll design pinches the plate between the 2 driven rolls, pre-bends the leading edge, and rolls the part along with the trailing edge in one pass.
  • Front rolls have independent hydraulic lifters that go in the orbital pattern.
  • Stabilizer torsion bar system keeps front rolls parallel to the top roll.
  • Plate is pinched at all times during the rolling cycle, so there’s no chance to lose the position.
  • You can adjust the angle of the rolls and bend cones.
  • Hydraulic system for material removal: yoke on top roll drops, allowing the roll to lift.

CONSOLE AND NC SYSTEM

  • Conveniently movable operator console with control panel.
  • Touchscreen controls 3 bending axes (X Y Z), 2 side supports, central support, and the pinching action.
  • Memory can store 300 programs with 99 steps each, great for those odd-shaped jobs.
  • Toggles let you operate the machine in manual mode.
  • You can incrementally enter desired bend points, then store them for a later date.
  • 2 DROs on the control panel show the front and back roll positions for repeatability.

WARRANTY AND AFTER-CARE

  • Covered by a 1-year parts warranty.
  • Comes with lifetime technical support by phone from Baileigh's team of knowledgeable reps.

Also available in a CNC version, the PR-10500-4CNC, and a non-NC version PR-10500-4.

Specifications:

Part Number PR-10500-4NC
Stock Number BA9-1008521
Rolling Cap. (Mild Steel) .55"
Forming Width 122"
Number of Rolls 4
Driven Rolls 2
Top Roll Dia. 11.4"
Bottom Roll Dia. 10.6"
Slide Roll Dia. 8.2"
Roll Adjustment Hydraulic
Programming Nexus NC System
Motor 10 hp.
Power 480V / 3-phase
Shipping Weight 17600lbs
Shipping Dimensions (Inches) 176" x 58" x 39"
Baileigh PR-10500-4NC Numerically Controlled Four Roll Plate Bending Machine