Baileigh HPB-45NC Horizontal Press Brake - BA9-1004703

The HPB-45NC horizontal press brake form Baileigh Industrial is truly a must have in any fabrications shop. This do it all machine can bend, punch, and shear with the correct tooling, yet takes up very little space. The HPB-45NC makes it much easier to make smaller parts such as flanges and brackets, because the material has a surface to lie on during the process. No having to hold one side and hope that it is perfectly level or lined up; the perfectly machined table takes care of that for you.

The HPB-45NC runs on 220 volt three phase power and produces a whopping 45 tons of pressure with its 5 hp motor. Operation of the HPB-45NC is very simple. It comes standard with an NC controller that can handle up to 99 programs with up to 10 bends per program. The operator can also put the machine in a manual mode for one off projects and set up as well. Bends are actuated by foot pedal control so the operator's hands are free to assist with the material. The HPB-45NC has an accuracy of +/- .002”.

Other features included with the HPB-45NC horizontal press brake are a set of single-vee tooling (7.8" high) as well as a manual back gauge to help with repeatability. Many tooling set are also available to help with any project that you may have.

This Baileigh horizontal press brake machine can bend, punch, and shear with the right tooling. You can easily make small parts, like flanges and brackets, because material lies on a flat surface.

• 5 hp motor produces up to 45 tons of pressure.
• 9.84" stroke length.
• Runs on 220-volt 3-phase power.
• Industrial-grade hydraulic system is located on top of the metal press brake to reduce flex.
• You can adjust the pressure of the the hydraulics for your material.
• Designed for simple operation. In 15 minutes, anyone could learn to run it.
• Numerical control (NC) programmer can store up to 50 programs with 10 bends per program.
• Electronic encoders make this hydraulic press brake accurate to +/- .002"
• Product counter makes production runs more efficient.
• Control the bending stroke with 2 buttons or with the foot pedal, so your hands are free to guide the material.
• You can also run the metal press brake in a manual mode for one-off projects as well as set-up.
• Robust manual back gauge bolts to the machine and helps with repeatability.
• Machined table, 36" high, keeps your material perfectly level. No need to hold one side and hope it’s lined up!
• Quick-release tooling system makes changes fast and simple. Just turn the handle and the post will lift. The V die slides in and out.
• Accepts attachments for punching, straightening, shearing, and even pipe bending.
• Includes 80mm single-V tooling (V-opening die and V post).
• Many additional tooling sets are available. We can find the right one for your project or create a custom set, if necessary.
• 2,266-pound steel frame, made from 4 powerful pieces of inch-thick flat bar, will keep results accurate for many years and won’t flinch under pressure.
• Shelving in the front can hold tooling and items you might need on a daily basis.
• We stock replacement parts, so we can ship them to you quickly.
• This Baileigh horizontal press is covered by a 1-year parts warranty.
• Baileigh's team of service reps, all with hands-in machine experience, are here to provide lifetime technical support by phone.

Also available in a 78-ton industrial hydraulic press brake (HPB-78NC)

Recommended for:

• Full industrial production, including shipbuilding yards, boiler manufacturers, nuclear applications.
• Making parts that are thick, but not wide (die size is limited).

Specifications: