STARRETT Telescoping Hole Gage Sets
- Measures the true size of holes, slots and releases from 5/16" to 6".
- The ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enter.
- Must be slightly "rocked" in the hole being measured to ensure that the tool is on the proper diameter before it is locked and withdrawn.
- The final hole size is obtained by measuring over the gage contacts with a micrometer
- Features a handle, one rigid contact arm and one spring-tensioned telescoping contact arm
- Similar to the 229 series with a slightly greater range and two telescoping contacts.
- Handles are rigidly attached to the contact plungers and are automatically self-centering.
- Constant spring tension give uniform contact pressure.
- Both plungers are easily locked at any desired setting.
STARRETT Telescoping Hole Gage Sets - 10-419-0
