Kent 3-Axis CNC Bed Mill 18" x 59" with Fagor 8055i CNC Control - TW-40QI-F
Features:
- 7.5 HP (MCO Model: 10 HP) AC Frequency Drive Spindle Motor
- MCO Model: 20 tools carousel ATC
- Meehanite GB300 casting for superior rigidity
- Hardened and Ground Square Y and Z-axis ways
- Hardened and Ground table top and dovetail ways
- Precision Ground ballscrews on X, Y and Z-axis
- Ultra precision ground spindle, ABEC-7 bearings
- Hardened and Ground spindle spline and taper
- Large Cabinet with shelves for Tools storage
- Auto Lube system with metered Check valves
- Metal telescoping way cover on Y-axis
- Built in Coolant system and Chip pan
- Halogen work light
- Handwheels on x & Y axis for manual operation
Complete with:
- Automatic Lube System
- Drawbar for CAT-40 Collets
- Metal Telescoping Front Way Cover & Rubber Rear Way Cover
- Electronic Variable Spindle Speeds (Programmable via CNC Control)
- Hardened & Ground Square Ways
- 3-Axis Fagor 8055i CNC Control
- Manual & Parts List for Mill
- Complete Operation Manual for CNC COntrol
Specifications:
| Model | TW-40QI |
| Table Size | 18" x 59" |
| Table Travel (X-Axis) | 40" (38" w/ control) |
| Saddle Travel (Y-Axis) | 21" (20" w/ control) |
| Knee Travel (Z-Axis) | 22" (20" w/ control) |
| Spindle Center to Column | 18.9" |
| Spindle to Table | 3.54" to 27.16" |
| Quill Travel | 5.5" |
| Quill Diameter | 4.173" |
| T-Slots (number x width) | 3 x 5/8" |
| Coolant Pump | 0.25 HP |
| Spindle Motor | 7.5 HP |
| Spindle Taper | NMTB-40 |
| Speed Range | 60 - 6000 RPM |
| Quill Power Feed (per rev) | 0.0017" / 0.0032" / 0.0054" |
| Drilling Capacity (Manual) | 1.25" |
| Drilling Capacity (Power) | 0.625" |
| Boring Capacity | 8" Diameter |
| Milling Capacity | 2.5 in3 /min |
| Maximum Work Load | 1320 lbs. |
| Net Weight | 6050 lbs. |
| Gross Weight | 6700 lbs. |
| Packing Dimension | 79" x 76" x 98" |
| Power Requirements | 220 volts, 60 Hz, 3-phase, 45 Amps |
See all Kent 3-Axis CNC Bed Mills with Acu-Rite G2 or Fagor 8055i CNC Control
Kent 3-Axis CNC Bed Mill 18" x 59" with Fagor 8055i CNC Control
