Scotchman SUP-600-NF Non-Ferrous Upcut Saw - SUP-600-NF
Non-Ferrous Upcut Saw designed for aluminum, PVC, copper, etc.
Standard Features:
- Precision Miter Upcut Non-ferrous Saw
- Safety Hood with Safety Switch that will not allow Saw to run with Hood Open
- Blade Door with Safety Interlock Switch
- Dual Palm Buttons
- Adjustable Feed Rate on Saw Head
- Two Horizontal Pneumatic Clamps
- Two Vertical Pneumatic Clamps
- Miter Capability 22.5° Left, 90° Straight, 0° Right
- Capable of Slotting
- Moveable Back Fence for Larger Capacity
- Coolant Tank with Mist Lubrication
- One Gallon Concentrated Coolant
- One 24" (600 mm) diameter Blade
- One Blade Wrench
- Air Hose
- Base Designed as a Chip Collection with Two Chip Extraction Ports
- Adjustable Leveling Pads
- 230 or 460 volt/3-ph Electrics (must specify voltage)
- Warranty: Three Years on Parts
- Made in Spain
Capacities / Specifications:
| 90 Degree | 45 Degree | |
| Round | 9" (230 mm) | 9" (230 mm) |
| Square | 8" (203 mm) | 7" (177 mm) |
| Rectangle | 15" x 6" (381 x 152 mm) | 10" x 4" (250 x 100 mm) |
| Cutting Speed | 3,000 RPM |
| Motor Rate | 5.5 HP |
| Factory Wired | Specify: 230 3-ph / 460 3-ph |
| Maximum Diameter Blade | 24" (600 mm) |
| Arbor Bore | 1.97" (50 mm) |
| Width | 51-1/4" |
| Depth | 48" |
| Height | (Top of Hood) 64-3/8" |
| Shipping Weight | 1,102 lbs. (500 kg) |
Scotchman SUP-600-NF Non-Ferrous Upcut Saw
