Sharp-Industries 6" x 18.3" Automatic Surface Grinder - SG618-2A
- Double “V” Ways for cross travel
- One “V” way and one flat way for longitudinal travel
- Both ways are hand-scraped and covered with Turcite B coating
- Accurate slot grinding achieved using saddle locking system combined with cross feed ballscrew
- Automatic lubrication system
- Advanced hydraulic system with independent oil tank provides vibration-free table movement
- Hydraulic table stroke setting
- Floor Space: 83"W x 51"H x 71"L
- Net Weight: 2,100 lbs.
Standard Equipment:
- Grinding Wheel (8” x 0.63” x 1.25”)
- KANETSU Chuck ( permanent) with Coolant System (12 Gal) & Splash Guard
- Auto Lube System
- Wheel Adapter/Flange
- Wheel Balancing Arbor
- Work Light
- Diamond Dresser
- Wired 220V or 440V. Please Specify
- Tool Kit includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, oil can, Grease Gun, Rear way cover bracket, Pin for indicator, and Can of paint
| Model | SG618-2A |
| Capacity | |
| Max. Grinding Length | 19.7" |
| Max. Grinding Width | 5/9" |
| Max. Distance-Table to Spindle Center | 16" |
| Table | |
| Working Surface W x L | 6" x 18.3" |
| Max. Longitudinal Travel | 21.6" |
| Max. Cross Travel | 7" |
| Feed Longitudinal Movement of Table | |
| Hydraulic Feed | 3.3 - 83 fpm |
| Hand Feed per revolution | 2.7" |
| Cross Movement of Saddle | |
| Intermittent Feed | 0.0006 - 0.4" ipm |
| Continuous Traverse Feed | 47 ipm |
| Hand Feed per revolution | 0.02" |
| Graduation of Hand Wheel | 0.001" |
| Vertical Movement of Wheel Hand | |
| Hand Feed per revolution | 0.05" |
| Graduation of Hand Wheel | 0.0001" |
| Rapid Feed | 1.1 - 11.8 ipm |
| Spindle and Wheel | |
| Spindle Motor | 1-1/2 HP |
| Spindle Speed | 3,600 RPM |
| Grinding Wheel Outside Diameter | 8" |
| Grinding Wheel Bore | 1.25" |
| Grinding Wheel Width | 0.63" |
Sharp-Industries 6" x 18.3" Automatic Surface Grinder
