Precise 3-Axis Digital Read-Out and Glass Scale Encoders

Brand:

(No reviews yet) Write a Review

Precise

Precise 3-Axis Digital Read-Out and Glass Scale Encoders

General Functions:

  • Inch/mm Conversion. 
  • Zero Reset. ]
  • Preset Dimension. 
  • 1/2 Distance Mode to aid Centre Finding. 
  • Absolute and Incremental coordinate display modes. 
  • Recall Memorized Position. 
  • Mechanical Zero & Workpiece Zero. 
  • Shrink Function: Shrinkage allowance can be set to compensate for casting or moulding shrinkage. 
  • Pitch Circle Diameter (PCD) Function: The console will output X and Y coordinates for each hole.

Calculator Functions:

  • Math Functions: Add, Subtract, Multiply, Divide. 
  • Trig Functions: SIN, COS, TAN, SIN-1, COS-1, TAN-1, X2, v, p (pi). 
  • Axis position can be transferred to calculator as an operator. 
  • Result can be transferred back to an axis.

Functions for Milling Machines and Lathes

  • Tool Compensation and Tool Number. 
  • Diameter or Radius Reading.

Display Console Specifications:

  • Resolution: .0002"/0.005mm (5 Microns). 
  • Display: 8 Digit LED. 
  • Response Speed: 60m/min. 
  • Error: ±1 Count. 
  • Power: 110-250VAC 50-60Hz. 
  • Operating Temperature Range: 0-40℃. Supplied with mounting arm. Connector: 7 pin DIN (screw locking)
  • .0002"/.005MM RESOLUTION
  • 3-Axis Display

Precise Glass Scale Optical Encoders

  • Grating Pitch: 0.001"/0.02mm
  • Accuracy: ±.0005"/0.01mm (200C1000mm)
  • Reference Marks: 1 ref. mark every 2"/50mm
  • Max Traversing Speed: 60m/minute
  • Output Signal: TTL
  • Connector: 7 pin DIN (screw locking)
  • Operating Temperature: 0-45℃.
  • .0002"/.005MM RESOLUTION
  • IP 53