Phase II Fully Automatic Rockwell Hardness Tester - 900-388

Brand:

(No reviews yet) Write a Review
SKU:
900-388

Phase II

Phase II Fully Automatic Rockwell Hardness Tester
900-388


Auto Z Axis!
Load Cell!

* Shown with optional large anvil


Features:

  • The test force is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit replace traditional dead weights. The result is highly accurate hardness test measurements at all test loads up to 0.5%.
  • Simple plug - and - play tech allows for much more quick and easy installation than traditional dead weight type machines.
  • Automated Z-Axis .Just press START key once, entire test process will be finished automatically. regardless of the size of the sample, the position of the sample, the distance between the indenter and sample surface. The sample will be auto-lifted to approach the indenter and finish hardness testing automatically.
  • Higher precision than handle wheel lifting/dead weight type machines which can be affected by user interaction.
  • Extended dolphin nose allows vertical hardness test height of 11.8” and throat depth of 8.6”.
  • Built-in micro-printer.


Basic Functions:

  • Twin hardness tester --Regular Rockwell & Superficial Rockwell hardness for metal and plastic material.
  • Horizontal dolphin nose Indenter is suitable also for internal and external hardness testing.
  • Rockwell Hardness Testing on Surfaces difficult to reach. Hardness Testing internal surface of rings and tubes.
  • Provided with many features such as high measuring precision, wide measuring range with 30 Rockwell scales.
  • The Rockwell hardness tester is suitable for testing of carbon steel, alloy steel, cast iron, non ferrous metal.
  • Automatic testing cycle: Lifting of part, pre-loading, loading, dwell, unloading, results will be finished automatically.
  • Measuring results digitally displayed and can be printed, or transmitted to external computer automatically via USB port.
  • Test HR value can be converted to the value of HB, HV, HK and σb value.
  • The tester meets the following standards: ISO 6508-2, ASTM E18.


Included Accessories:

Standard hardness block for A scale
Standard hardness block for B scale
Standard hardness block for C scale (3)
Standard hardness block for 30N scale
Standard hardness block for 30T scale
Ball indenter (1/16")
120°cone diamond indenter
Mounting screws for indenter (2)
Flat anvil
"V" shape anvil
Power supply cord
Screwdriver for indenter mounting
Dust cover


Parameters:

Preload 29.4N(3kgf), 98.1N (10kgf)
Total test force 147.1N(15kgf), 294.3N(30kgf), 441.3N(45kgf),
588.4N (60kgf), 980.7N (100kgf), 1471N (150kgf)
Scales  HR15N, HR30N, HR45N, HR15T, HR30T, HR45T,
HR15W, HR30W, HR45W, HR15X, HR30X, HR45X,
HR15Y, HR30Y, HR45Y
HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK,
HRL, HRM, HRP, HRR, HRS, HRV
Load dwell duration 2 ~ 50s, can be set and stored
Resolution 0.1HR
Display High definition backlight LCD
Operation Menu selectable, Membrane keypad,
Upper/lower limits setting & alarming
Data statistics Avg., Max., Min., S, R , Curved surface auto correction
Memory 400 items of test results stored automatically
Testing Capacity 300mm (vertical) , 220mm (horizontal)
Dimensions 690mm x 280mm x 860mm
Power supply AC, 220V/110V, 50~60Hz, 4A (convertible)
Net weight 86 kg (190lbs)
Gross weight 120kg (265 lbs)
Phase II Fully Automatic Rockwell Hardness Tester