National Mechanical Shears

Brand:

(No reviews yet) Write a Review
National Mechanical Shears

Features:
All USA made, rugged welded construction. Inch bed scales, accurate table side guages.. Hold Down / Finger guard with non marring urethaneand positive spring actuation. High carbon high chromelong life tool steel blades. Upper and lower blades are interchangable. Non-metalic gibs,maintenance free self lubricating bearings. Continuous cycle, single cycle and jog for different needs. Fully guarded safety foot switch, low power consumption. with quite Operation.

These powerful Mechanical Shears comes Optional with the QUICK SET front operated, manual and digital back guage with two turns of the handle will travel 32 inches in two seconds.

Specifications  
Model NM410 NM610 NM810 NM1014
Capacity Tensile Strength 55,000 @ rated cap Mild Steel
10 Gauge 3.4 mm
SS 14 Gauge 2mm
Mild Steel
10 Gauge 3.4 mm
SS 14 Gauge 2mm
Mild Steel
10 Gauge 3.4 mm
SS 14 Gauge 2mm
Mild Steel
14 Gauge 2 mm
SS 16Guage
1.6 mm
Strokes Per Minute Approx. 40 Approx. 40 Approx. 40 Approx. 40
Cutting Legnth 49"/1244 mm 73"/1854 mm 97"/2464 mm 121"/3073 mm
Shipping Weight 3600 lbs/1632 kg 4900 lbs/2223 kg 6850 lbs/3107 kg 6100 lbs/2767 kg
Floor Space w/ Gauges 73"x89"x53"
1854x2260x1346
92"x89"x53"
2362x2260x1346
117"x89"x53"
2972x2260x1346
141"x32"x53"
3581x2260x1346
Floor Space w/o Gauges 73"x28"x53"
1854x711x1346
93"x28"x53"
2362x711x1346
117"x28"x53"
2972x711x1346
141"x32"x53"
3581x813x1346
Motor 7.5 hp 208 v
240 v
460 v
3 phase
7.5 hp 208 v
240 v
460 v
3 phase
7.5 hp 208 v
240 v
460 v
3 phase
5 hp 208 v
240 v
460 v
3 phase