Mitutoyo Bench-Top Type Laser Scan Micrometer LSM-9506 with Display

Brand:

(No reviews yet) Write a Review

Mitutoyo

Mitutoyo Bench-Top Type Laser Scan Micrometer LSM-9506 with Display


Series 544-Bench Top Type Non-contact Measuring System


Optional Accessories:

  • 02AGD170 - Calibration gage set (ø1.0mm, ø60mm)
  • 02AGD680 - Adjustable Workstage
  • 02AGD580 - Center support**
  • 02AGD590 - Adjustable V-block**
  • 936937 - SPC output cable (1m)
  • 937179T - Footswitch
  • 264-012-10 - USB Input Tool for spreadsheets (SPC cable also required)

** Use with an adjustable workstage.

  1. ** Determined by the value for ±2σ at the measurement interval of 0.32 sec.
  2. ** At the center of the measuring region
  3. ** An error due to workpiece shift either in the optical axis direction or in the scanning direction. L= Distance between the center of workpiece and the center of optical axis (in mm or inches)
  4. ** The area given by "measuring range on the optical axis" x "measuring range in the scanning direction"
  5. ** FDA Class II (544-116-1A) semiconductor laser for scanning (Maximum power: 1.0mW)


QUICKTOOL is a free software program that makes programming the LSM-6200 quick and easy. Basic data acquisition is also possible. Included as standard accessory. (Connecting cables to PC are optional)


Specifications:

Model LSM-9506
Order No 544-116-1A
Measuring Range 0.02 - 2.36" / 0.5 - 60mm
Resolution 0.000002 - 0.005" / 0.00005 - 0.1mm
Repeatability*1 0.00003"-0.6um
Accuracy*2 (20°C) Linearity (*2)
± .0001in (±2.5µm)

The optical axis direction
± .0001in (±2.5µm)

The scanning direction
±(.00008+L/10000)in [L:inch] (*3)
±(2.0+L/10)µm [L:mm] (*3)
Positional error*3 (optical axis/scanning direction) ±2.5µm (±.0001")
L: Displacement between workpiece center and optical axis center
Measuring Area*4 0.02 - 2.36" / 5 - 60mm
Scanning Rate 1600 per sec
Laser wavelength 650nm (Visible)*5
Laser scanning speed 226m/s (8900" / s)
Display Unit 16-digit dot matrix (upper column) + 7 segment 11-digit (lower column),guidance LEDs
Standard interface RS-232C, Digimatic code output unit (1ch)
Optional interface No
Data Output RS-232C,VO Analog Interface,SPC
Power Supply AC100V to 240V, 50/60Hz, 40VA
Operating Enviorment 0 to 40°C, RH 35 to 85% (no condensation)



View all of the Optional Accessories for Laser Scan Micrometers