Mitutoyo ABSOLUTE Digimatic Indicator ID-N112E, IP66, 0.5"/12.7mm - 543-576

Brand:

(No reviews yet) Write a Review
SKU:
543-576
Type:
ID-N
Range:
0.5" / 12.7 mm
Resolution:
0.00012" / 0.003 mm
Accuracy:
0.00012" / 0.003 mm

Mitutoyo

Mitutoyo ABSOLUTE Digimatic Indicator ID-N112E, IP66, 0.5"/12.7mm - 543-576


This is a slim back-plunger model that is highly resilient and robust.
The ABSOLUTE Digimatic Indicator ID-N offers you the following benefits:

  • It slim body design is ideal for multi-point measurements.
  • The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.
  • It has excellent resistance against water and dust (IP66 protection level) allowing you to use it in machining situations that include splashing coolant fluid.
  • Switchable display orientation gives you more mounting options.
  • You can perform GO/±NG judgement by setting the upper and lower tolerances.


Features:

  • Proven ABSOLUTE sensor
  • Rated to IP66 water- and dust-proofing standard and oil resistance improved
  • Slim body design is advantageous for multi-point measurements
  • Improvement in workability with the LCD readout-rotation function
  • Back plunger design (ID-B)
  • Built-in tolerance judgment function
  • Switchable resolution
  • Waterproof data output connector
  • Built-in hold/preset function


Technical Data:

  • Resolution: 0.01mm, 0.01mm/0.001mm, .0005”/0.01mm
    or .0005”/.00005”/0.01mm/0.001mm
  • Display: LCD
  • Length standard: ABSOLUTE electrostatic capacitance type
  • linear encoder
  • Max. response speed: Unlimited
  • Measuring force: 2.5N (2.0N: Back plunger type)
  • Battery: SR44 (1 pc.), 938882
  • Battery life: Approx. 7000 hours under normal use
  • Dust/Water protection level: IP66


Function:

  • Zero-setting, Presetting, Direction switching, Tolerance judgment, Display hold, Data output, inch/mm conversion (on inch/metric models only)
  • Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error


Optional Accessories:

  • 21EZA105: Lifting knob (for ISO/JIS model) 
  • 21EZA150: Lifting knob (for AGD model) 
  • 21EZA145: Lug (for JIS/ISO model) 
  • 21EZA146: Lug (for AGD model) 
  • 02ACA376: Rubber boot (for ID-N, NBR) 
  • 238774: Rubber boot (for ID-N, silicon) 
  • 125317: Rubber boot (for ID-B, NBR) 
  • 21EAA212: Rubber boot (for ID-B, silicon) 
  • 21EAA194: SPC cable (40" / 1m) 
  • 21EAA190: SPC cable (80" / 2m) 
  • 21EAA210: Bifurcated connecting cable with zero-setting terminal (40" / 1m) 
  • 21EAA211: Bifurcated connecting cable with zero-setting terminal (80" / 2m)



See all Mitutoyo ABSOLUTE Digimatic Indicators ID-N/B Series 543

Digimatic Indicator ID-N112E