Kent 14" x 40" CNC Lathe w/ Fagor 8055i CNC Control - CSM-1440CNC
Features:
- 7.5 HP Peak Fagor Servo Spindle motor
- Manual and CNC mode conversational control
- Rigid Meehanite castings with extra ribbing
- Induction hardened and ground ways
- Gearbox with alloy steel gears that are hardened and ground
- Extra large precision ground ballscrews
- 50-2,500 RPM range; electronic handwheels
- Auto Lube system with metered Check valves
- Optional Automatic 4 position electric Turret available
Complete with:
- Toolpost
- Work Light
- 3 MT Tailstock
- Full enclosure with Sliding Front Doors as well as Side & Rear access
- Coolant system
- Front Access Slide Out Chip Tray
- Manual & Parts List
- Automatic Lube System
- Complete Operation Manual for Fagor 8055i CNC Control
Specifications:
| Model | CSM-1440CNC |
| Swing Over Bed | 14" |
| Swing Over Cross Slide | 8-5/8" |
| Distance Between Centers | 40" |
| Width of Bed | 8.1" |
| Spindle Nose | Camlock D1-4 (Opt. ASA A1-4) |
| Spindle Bore | 1.5" |
| Spindle Taper | M.T. #5 |
| Spindle Speeds | 30-2500 RPM (3 Steps) |
| Longitudinal Travel (Z-Axis) | 33" |
| Cross Slide Travel (X-Axis) | 8" |
| Z-Axis Ballscrew Diameter | 1.259", 5 mm pitch |
| X-Axis Ballscrew Diameter | 0.98”, 5 mm pitch |
| Z-Axis Rapid Traverse Speed | 236"/min |
| X-Axis Rapid Traverse Speed | 236"/min |
| Tailstock Quill Diameter | 1-3/4" |
| Tailstock Quill Travel | 4-3/4" |
| Tailstock Taper | M.T. #3 |
| Spindle Motor | 7.5 HP |
| AC Servo Motor (Z-Axis) | 1.1 HP |
| AC Servo Motor (X-Axis) | 1.1 HP |
| Net Weight | 2530 lbs. |
| Gross Weight | 2750 lbs. |
| Packing Dimension | 100" x 65" x 79" |
Kent 14" x 40" CNC Lathe w/ Fagor 8055i CNC Control
