Kent Heavy Duty Lathe w/ NEWALL DP-700 DRO, 30" x 120" - HW-30120

Brand:

(No reviews yet) Write a Review
SKU:
HW-30120

Kent USA

Kent Heavy Duty Lathe w/ NEWALL DP-700 DRO, 30" x 120" - HW-30120

with 4-1/2" Spindle Bore & NEWALL DP-700 Digital Readout Installed!


Features:

  • Center sleeve
  • Threading dial
  • 15 HP Spindle Motor
  • 12 speeds 10 - 1,000 RPM
  • Solid full-length cast iron base
  • Extra large 4-1/2" spindle bore
  • 2-way power rapid traverse on Apron
  • Hardened & ground gears and splines
  • Extra wide range of inch/metric threading capabilities & adjustable feed carriage stop
  • Precision rigid spindle with 3-point support
  • Hardened & ground cross slideways & bedways


Complete with:

  • Follow Rest
  • 15" 3-Jaw Chuck
  • Toolbox with Tools
  • Manual & Parts List
  • Roller Jaw Steady Rest
  • 4-Position Carriage Stop
  • 4-Way Indexable Toolpost
  • Coolant System with Full Length Rear Splash Guard
  • 2-Way Rapid Traverse on Apron


Specifications:

Model HW-30120
Swing Over Bed 30"
Swing Over Cross Slide 21.3"
Swing Over Gap 38.9"
Width of Bed 15.75"
Distance Between Centers 120"
Cross Slide Travel 14.75"
Top Slide Travel 8"
Spindle Speeds 12
Spindle Speed Range 10-1000 RPM
Through Hole Diameter 4.5"
Spindle Nose D1-11
Spindle Bore Taper MT#7
Thread – Inches Pitch 44 (2-56) TPI
Thread – Metric Pitch 39 (0.5-14) mm
Longitudinal Feed 0.002"–0.032" in/rev
Cross Feed 0.001"–0.0094"
Quill Travel 6.5"
Quill Diameter 3.3"
Quill Bore Taper MT#5
Main Motor 15 HP
Coolant Pump Motor 1/8 HP
Packing Dimensions 214" x 47" x 76"
Net Weight 8663 lbs.
Shipping Weight 9000 lbs.



See all Kent Heavy Duty Lathes w/ NEWALL DP-700 DRO

Kent Heavy Duty Lathe w/ NEWALL DP-700 Digital Readout, 30" x 120"