Hirschmann H20 ControFil 2 Wire EDM Corrosion Inhibitor & Cleaner

H 2 0 ControFil 2 was developed for use in wire EDM machines to prevent undesirable corrosion of work pieces and to continuously help keep the machine clean. Once added to the system,H 2 0 ControFil 2 allows more dirt and waste products to be captured by the filtration system, this helps keep the entire machine cleaner.

H 2 0 ControFil 2 is generally recommended for new machine installations where tank walls, filters, hoses, etc. are free of contamination.

H 2 0 ControFil 2 is added to the de-ionized water in a container outside the machine and thendivided equally between the dirty-water and clean water tanks. A concentration ratio of 0.5 to 100 guarantees optimal rust proofing and cleaning.

Features:

• Keeps watertanks, hoses, etc. clean
• No alteration of conductivity
• No effect on the cutting efficiency of the machine
• Low concentration (0.5% vol.)
• Physiologically safe
• No toxic or hazardous additives
• No interference with waste disposal
• No influence on steel, non-ferrous heavy metal and graphite
• Can be removed with water
• The concentration level can easily be be checked with a (0-10%) refractometer at a reading of 0,3 to 0,4

When used in existing installations, H 20 ControFil 2 will clean tank walls, hoses, etc. of contamination and may require premature changing of filters after approximately 40 hours of operation.

Once the system is clean, use of H 2 0 ControFil 2 will continue to keep the system clean and offer corrosion inhibiting capabilities.

Click to view the Material Safety Data Sheet