Haimer Coaxial indicator Centro with Straight Probe 5mm

Mfg part#  80.300.00FHN  

Provides quick and precise location of the centers of bores and shafts

Dial Gauge always in sight
The probe tip slides at low spindle speed along the surface of the workpiece. Its movement is transferred to the pointers of the dial gauge. The housing of the Centro does not rotate with the spindle and thus the dial gauge always stays within sight of the operator.

Centro finds the axis you wanted for sure. The pointers deflect as long as the spindle and the wanted axis do not coincide. Now the position of the spindle can be corrected until the pointers come to a standstill. The wanted axis is found.

Further advantages:
Checking face run of surface to spindle.
Concentricity errors of spindle and chuck will be compensated>> Adjustment not necessary.
The unusual big sized dial gauge eliminates every single imprecision.
Replaceable probe.

Specifications:

Straight probe Tip . . . . . . . . . . . 5mm

Shank Size . . . . . . . . . . . . . . . .16mm

Centering Accuracy . . . . . . 0,003mm

Max. Rotation Speed . . . . . 150 1/min

Measuring range interior diameter

Drill hole . . . . . . . . . . . . . . 3-125mm

Measuring range exterior diameter

(Shaft, with probe tip bent) . .0-125mm