GasiQ Optimator Regulator Optimator US CGA 580 70SCFH 4000PSI 3737-8000 - GOR-100


(No reviews yet) Write a Review
GasiQ Optimator Regulator

ELGA Optimator US CGA 580 70SCFH 4000PSI   


ELGA Optimator® is a high performance multi-stage regulator with built-in economizer and flow meter. It is mostly used for advanced gas shielded welding applications, where it will reduce the total welding cost by decreasing the gas consumption by up to 50%. In addition, reduced porosity sensitivity improves weld quality. 

The Optimator two stage function will give stable gas flow stabil even when the cylinder pressure drops.

Elga Optimator® - You must look hard for better return on an investment!
Most companies working with MIG/MAG and TIG welding know very well the price of welding wire per kilogram. But, relatively few are aware that the cost of the shielding gas is at least as high, per meter of weld. Elga Optimator® is designed for one sole purpose, to reduce your consumption of expensive gas, generally by 30%. Just a few months using your Elga Optimator® and you will get your money back - the rest is pure profit.

Ordinary regulators are too slow!

The Elga Optimator® produces an optimised shielding gas flow from the very first second. Any traditional regulator will not control the initial flow surge, which is unnecessarily high, and a very expensive waste. In worst cases this excessive surge represents up to 50% of your total shielding gas consumption! The higher the freqency of starts, the more gas is wasted and more money could be earned when you change to the Elga Optimato®r.

Quality without cost

The Elga Optimator® provides optimal start flow that is approx. 1/4 of the initial flow of a conventional regulator. This saves you shielding gas. The smooth initial flow, in addition, enables higher quality of welds since you minimize the turbulence that often influences your welding process.


GasiQ Optimator Regulator