Ellis Drill Press Model 9400
Infinitely Variable Speed Drill Press
Features:
- Variable speed from 0 to 1200 rpm
- Adjust speeds while operating in the material
- High torque at low rpm speeds
- Instantaneous reversing for tapping
- Tapping head is not needed
- Machine tap goes into ball bearing chuck
- Can tap either left or right handed threads
- Drill head and table rotate 360° around column
- Smooth operating table raiser
- Fully enclosed spindle
- Quill lock and depth control
- Same ball bearing chuck holds both drill and tap
Speed Control:
- Continuous speed adjustment while in operation
- Instantaneous reversing for tapping
- One turn on knob for adjusting speed (0 to 1200 rpm)
Specifications:
| Motor | 2 HP A.C. single phase - choose 110/220V |
| Control box | - Infinitely variable speed with a turn of the dial - Instantaneous electronic reversing - Full torque at low speeds - All solid state circuitry - Continuous speed adjustment while in operation |
| Spindle speeds | 0 – 1200 RPM |
| Drills to center | 18-1/8" |
| Drilling capacity | Steel: 1-1/16" Cast Iron: 1-1/4" |
| Tapping capacity | 3/4" |
| Morse taper | No. 3 |
| Quill diameter | 3" |
| Column diameter | 4" |
| Spindle travel | 5-3/8" |
| Spindle to table (max.) | 27-1/4" |
| Spindle to base | 46-1/4" |
| Shipping weight | 675 lbs. |
| Table | Production type: T-slotted 15-7/8" x 17-7/8" 2 Slots for 1/2" T-bolts ground working surface coolant trough |
| Base | T-slotted 16-3/8" x 26-5/8" 2 slots for 1/2" T-bolts ground working surface |
| Size | Height: 69-1/2" Width: 20" Depth: 29" |
