Dake PDL.NC Hydraulic Press Brakes, Manual Control

Brand:

Call for Pricing

(No reviews yet) Write a Review

Dake

Dake PDL.NC Hydraulic Press Brakes, Manual Control


Dake offers a line of guided-platen, hydraulic H-Frame design press brakes from 40 to 400 tons. These H-Frames can be configured with either a 2 or 4-post upper guided platen and a stationary lower platen for mounting tooling. The power unit selection includes manual, semi-automatic, or automatic controls.


Features:

  • Welded frame construction with reinforcements inside
  • Upper and lower V forming dies
  • Quiet, low pressure hydraulic components for long life, greater efficiency, and smooth pressing operation
  • 2-speed power unit automatically shifts from rapid advance to pressing speed
  • Lower table welded to frame with holes for mounting feed supports
  • One-hand joy-stick lever control
  • Adjustable limit switches for up and down stroke


Specifications:

Model PDL 40NC PDL 70NC
capacity (tons) 40 70
horsepower 5.5 5.5
ram speed advance (ipm) 21 24
ram speed pressing (ipm) 21 12
ram travel 13 13
daylight (inches) 9-3/4 9-3/4
width between uprights (inches) 35 35
height (inches) 81 85
base (inches) 67 x 28 67 x 28
V brake (inches) 32 32
weight (lbs) 2,315 2,976

 

Model PDL 100NC PDL 100BNC PDL 100CNC
capacity (tons) 100 100 100
horsepower 5.5 5.5 5.5
ram speed advance (ipm) 24 24 24
ram speed pressing (ipm) 9 9 9
ram travel 13 13 13
daylight (inches) 7-3/4 7-3/4 7-3/4
width between uprights (inches) 41 61 61
height (inches) 85 89 89
base (inches) 75 x 34 97 x 40 97 x 40
V brake (inches) 32 39 59
weight (lbs) 4,850 6,283 6,724

 

Model PDL 150NC PDL 150CNC
capacity (tons) 150 150
horsepower 5.5 5.5
ram speed advance (ipm) 21 21
ram speed pressing (ipm) 7 7
ram travel 13 13
daylight (inches) 7-3/4 7-3/4
width between uprights (inches) 61 61
height (inches) 93 93
base (inches) 103 x 40 103 x 40
V brake (inches) 39 59
weight (lbs) 11,244 12,126