Clausing-Kalamazoo 17" x 27" Automatic Horizontal Twin Column Miter Bandsaw MS1727NC

Brand:

Call for Pricing

(No reviews yet) Write a Review

Clausing

Clausing-Kalamazoo 17" x 27" Automatic Horizontal Twin Column Miter Bandsaw - MS1727NC

  • Swivel saw head mitering from 90° to 60° Left to 45° Right
  • Rigid and heavy-duty pivot and trunnion
  • Sturdy cast work table
  • 24.4" solid discharge table with coolant return
  • Variable speeds from 66 thru 330 fpm
  • Carbide blade guides with roller bearings
  • Two additional bearings to support blade from the top
  • Cast iron guide arm supported by heavy-duty cast iron dovetail
  • Automatic hydraulic blade tensioning
  • Integral coolant system
  • Synchronized blade brush
  • Precision feed pressure & feed rate dual valve system
  • Conveniently designed control station 
  • Electrical components located inside the control box with main lockout disconnect
  • Work height selector
  • Industrial rated hydraulic components
  • Full stroke machine vises
  • Breakage detector
  • Built-in adjustable material stop
  • Adjustable work light
  • Additional flushing hose
  • Bi-metal saw blade
  • Tool box, leveling pads and an additional wire brush
  • Operation & parts manual
  • Two (2) year limited warranty


Control Features:

SNC-100 controls are programmable up to 100 different jobs including quantity and length of cut. The control automatically compensates for kerf loss after data input and requires no manual calculation of number of times to index. The control also automatically shuts down the machine, blade motor, and hydraulics, once the programmed number of cuts or out of stock situation has been achieved.

  • 5.7” HMI touch screen and Mitsubishi controller
  • 100 individual jobs can be programmed and stored
  • Easily recall and execute stored programs
  • Automatic kerf loss compensation and automatic multiple indexing up to 393.6”
  • Save-A-Blade automatic vise retracting after material cut-off, reducing abrasion and improving blade life
  • Rapid troubleshooting through error feedback system
  • Maintenance reminder signals


Specifications:

*Motor 7.5 Hp 230v 3ph
Hydraulic Pump Motor 2 Hp
Hydraulic Oil Capacity 19.2 gallons
Blade Speeds (Variable Speed) 66-330 fpm
Blade Size (W x T x L) 1.5” x .050” x 228”
41mm x 1.3mm x 5800mm
Blade Tension Hydraulic
Coolant Recirculating
Coolant Capacity 31.2 gallons
90° Cutting Capacity
Round
Rectangle

17.7”
17.7” x 27.5”
45° Cutting Capacity
Round
Rectangle

17.7”
17.7” x 20.5”
60° Cutting Capacity
Round
Rectangle

11.8”
17.7” x 11.8”
Dimensions
Length
Width
Height

166.5”
130”
107”
Bed Height 29.5”
Net Weight 5,500 lbs.
Shipping Weight 6,160 lbs.


* Other voltages may require a transformer or factory order.


Optional Equipment:

  • P10 - Stock Stand Assembly 21" - 30" Height
  • VP17NC - Vise Press Regulator (factory installed)
  • CLAUS2-A12K - Transformer (208 volt to 230 volt)
  • CLAUS1-A12K - Transformer (460 volt to 230 volt)
  • CM1701MC - Chip Conveyor
  • CM1702MC - Hydraulic Bundle Clamps
  • MS17-AMP - Motor Load Meter factory installed
  • MS17-SHD - Stock Height Detector factory installed
  • MS17-BDD - Blade Deviation Detector factory installed
  • MS17-AWR - Automatic Wedging Resistance
  • SA26 - H.D. Roll Table 25" x 10' x (24" - 32") 3" Ctr. (10K cap)
  • SA27 - H.D. Roll Table 25" x 5' x (24" - 32") 3" Ctr. (10K cap)
  • CSR1 - SAWZIT 1 Gallon Coolant
  • CSR5 - SAWZIT 5 Gallon Coolant