Baileigh TS-1248P-52 Professional Cabinet Table Saw - BA9-1008084

Brand:

(No reviews yet) Write a Review
SKU:
BA9-1008084

Baileigh

Baileigh TS-1248P-52 Professional Cabinet Table Saw - BA9-1008084

When looking for a truly professional cabinet table saw, good capacity and power are a must. The TS-1248P is a 12" diameter blade table saw that is available in two different sizes. The TS-1248P-36 has a 36" right side rip capacity, while the TS-1248P-52 has an extension for 52" right side rip capacity. Both run on 220 volt single phase 5 HP motor that produces 3600 RPM. Because of the extra power, the TS-1248P has a 1" arbor that tilts 45 degrees to the left. To make operation even easier, the bevel has a digital readout for increased accuracy.

Another unique feature of the TS-1248P series is the rip fence that incorporates a digital readout for rip capacity. Just "zero" the DRO at the blade and away you go. No second guessing the length of cut. The table and extensions for the TS-1248P are made from precision ground cast iron. These tables are placed upon a super rigid all steel base for accurate alignment. The other standard features to the TS-1248P series are: miter gauge, standard and dado inserts, deluxe rip fence and 4" dust collection port.

With an all-steel base attached to a massive, vibration-reducing trunnion, this industrial cabinet table saw can cut thousands of feet of board per day. Order this professional table saw from Baileigh Industrial.

  • 52" right-side rip capacity lets you tackle long pieces of material.
  • Also available in a 36" rip capacity version.
  • 5 hpmotor turns at 3600 rpm.
  • Accepts standard 12" blades with a 1" arbor that can tilt 45° to the left.
  • Run on 220-volt single-phase power, so it'll work almost anywhere.
  • 48" x 30" work table with 52" extensions.
  • Both the industrial cabinet table saw and its extensions are made from precision-ground cast iron.
  • Table surface will stay square because of webbed or criss-cross design on the bottom that meshes into the base.
  • The tabletop won't warp in spite of heat and moisture.
  • Smoothly finished table allows wood to slide without resistance. There's no unevenness to compromise the accuracy of your cut.
  • You can polish the cast-iron table up and restore the original shine even after years of hard use.
  • Rip fence incorporates a digital readout (DRO) for rip capacity.
  • Just "zero" the DRO at the blade to get a perfect, repeatable length every time.
  • Steel handwheels, for adjusting blade height and miter angle, are located on the base.
  • Rack and pinion mechanism makes it easy to move the blade up and down.
  • Comes with a simple miter gauge on the tabletop and DRO for the bevel angle on the base to help with repeatability.
  • Massive steel trunnion is attached to the base, so the machine won’t wobble or exceed safe noise levels.
  • Rigid all-steel base maintains accurate alignment and keeps vibrations down to a minimum.
  • Dust shroud inside the machine collects sawdust from under the blade and funnels it to the 4" port. Just hook up an extraction system.
  • CSA-approved.
  • 4-piece safety blade guard with anti-kickback reverse teeth.
  • Includes both a splitter and riving knife to help spread the wood and prevent pinching or twisting.
  • Covered by a 1-year parts warranty.
  • Baileigh's team of reps (all with hands-on machine experience) will provide lifetime technical support by phone.

Specifications:

Part Number TS-1248P-52
Stock Number BA9-1008084
Shipping Weight 890 lbs
Table Size (Length) 24.4"
Table Size (Width) 30.7"
Table Saw Working Table 64.4" x 30.7"
Table Saw Blade Diameter 12"
Table Saw RPM 3600
Table Saw Arbor 1"
Table Saw Cutting Height @ 90° 4"
Table Saw Cutting Height @ 45° 2-3/4"
Maximum Dado Diameter 8"
Maximum Dado Width 13/16"
Maximum Rip Cut (Right) 52"
Power 220V Single Phase
Horse Power 5
Weight 700 lbs
Shipping Dimensions 60" x 44" x 54" & 98" x 36" x 13"
Baileigh TS-1248P-52 Professional Cabinet Table Saw