Baileigh R-H120E Double Pinch Roll Bender - BA9-1009408

Brand:

(No reviews yet) Write a Review
SKU:
BA9-1009408

Baileigh

Baileigh R-H120E Double Pinch Roll Bender - BA9-1009408

Baileigh's R-H120E Hydraulic Tubing Roller costs less than the R-H120 Ring Roller, but offers many of the same time-saving features.

  • Runs on 220-volt 3-phase power
  • 3 driven rolls, made of hardened segmented steel, can tackle a capacity of up to 5.5" round tube and 4.5" schedule 40 pipe
  • 2 independent hydraulic cylinders connected to bottom rolls accomplish pre- and post-bending for tighter rolling
  • You can manually adjust the lateral angle guides to ensure correct bend angle and prevent material from twisting
  • Movable operator control podium includes digital readout for the roll positions with a programmable stop
  • Convenient foot pedals, attached to podium base, let you stop and start the roller in forward and reverse directions
  • Shift the machine between vertical and horizontal positions depending on the material and the bend radius
  • Heavy-duty steel frame is bolted and welded to eliminate flex when bending at full capacity

Why choose the R-H120E over similar machines?

  • Tough steel construction maintains accuracy—and sets this pipe bender apart from most competing models, which lack the structural strength of the R-H120E.
  • This double-pinch pipe bender reduces wasted straight material at bend ends.
  • Digital readout displays roll position to simplify the chore of checking bend specifications and increase repeatability during production runs.
  • Overload-protected inverter drive cuts down on unnecessary machine wear and tear.
  • The R-H120E accepts a variety of optional tooling sets to fit your applications.

Specifications:

Part Number R-H120E
Stock Number BA9-1009408
Driven Rolls 3
Roll Adjustment Hydraulic
Round Tube Capacity Size: 5.5" (.120") / Min. Dia.: 118"
Square Tube Capacity Size: 4" (.196") / Min. Dia.: 118"
Solid Square Capacity Size: 2.375" / Min. Dia. 46"
Solid Round Capacity Size: 2.75" / Min. Dia. 32"
Flat Bar Easy Way Size: 7.875" (2") / Min. Dia.: 40"
Flat Bar Hard Way Size: 4" (.984") / Min. Dia.: 63"
Angle Iron Capacity Size: 4" (.393") / Min. Dia.: 63"
Shaft Diameter 3.937"
Upper Roll Dia. 9.65"
Speed 5.5 rpm.
Motor 10.5 hp.
Pinch Double
Digital Readout Yes
Power 220V 3-Phase
Shipping Weight 4,975 lbs.
Material Type All Specs based on 60,000 PSI (42 Kg/mm 2)
Tensile Strength – Mild Steel.
*Optional Tooling Some applications may require optional tooling.
Please contact us with specific application details.
Shipping Dimensions 63" x 62" x 77"
Baileigh R-H120E Double Pinch Roll Bender