Baileigh BP-5060NC Hydraulic Sheet Metal Press Brake, 50 Ton, 61" Length - BA9-1000824

Brand:

(No reviews yet) Write a Review
SKU:
BA9-1000824

Baileigh

Baileigh BP-5060NC Hydraulic Sheet Metal Press Brake, 50 Ton, 61" Length - BA9-1000824

With its 6,000-pound steel frame, this hydraulic press brake makes crisp bends across its full 61" width. The stroke and back gauge are tied to encoders with DROs for precision.

  • Delivers up to 50 tons of pressure.
  • Maximum capacity of .118" thick sheet metal across the machine's full width.
  • 5 hp main motor requires 220-volt 3-phase power.

POWERFUL, EASY-TO-USE HYDRAULIC SYSTEM

  • Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
  • 2 encoder-controlled hydraulic cylinders move the top beam.
  • Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
  • It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).
  • You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend keeps its shape.
  • 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
  • Foot pedal brings the stroke up and down, leaving your hands free to position the material.
  • Motorized back gauge rides on a solid ball screw trolley mechanism.
  • Back gauge encoder shows its position on its own DRO.
  • Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.

RIGID STRUCTURE AND LOW MAINTENANCE

  • Heavy electrowelded frame, made of solid plate steel, keeps this press brake accurate and running smoothly in production for many years.
  • Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high accuracy between both dies at any position of the stroke.
  • Includes a set of hardened single-Vee American tooling.
  • Accepts standard press brake tooling, giving you a wide variety of options.
  • Comes with front material rests (or support arms), which some competing machines do not include.
  • 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
  • 4 grease zerks let you add oil every few months.
  • Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.

LIFETIME SERVICE

  • Most replacement parts are in stock at Baileigh's Wisconsin headquarters, so we can get them to you quickly.
  • Comes covered by a 1-year parts warranty.
  • Baileigh provide lifetime technical support by phone from reps who have hands-on machine experience.

Recommended for: Small industrial shops, maintenance and R&D shops, and potentially larger industrial shops, if they need to make a specific part that fits this press brake’s width.

Specifications:

Part Number BP-5060NC
Stock Number BA9-1000824
Return Speed 2.36" / sec.
Maximum Pressure 50 tons
Oil Capacity 28 gal
Throat Depth 7.87"
Bending Capacity Max Length Max Thickness 61" / .118"
Stroke Distance 5.9"
Approach Speed 3.14" / sec.
Back Gauge Motor 1/2 hp
Bending Speed .275" / sec.
Main Motor 5 hp
Distance Between Housings 49.21"
Distance From Table To Ram 11.81"
Power 220V / 3-phase
Shipping Weight 6160 lbs
Shipping Dimensions (Inches) 90 x 63 x 96
Baileigh BP-5060NC Hydraulic Sheet Metal Press Brake, 50 Ton, 61" Length