Trepanning Tool for Mills, Drill Presses, Etc. - 80-005-2

Brand:

(No reviews yet) Write a Review
SKU:
80-005-2
Capacity:
3/4 - 3"
Cutter Size:
5 mm
Shank:
MT 2

Trepanning Tool for Mills, Drill Presses, Etc.


Major Breakthrough in Trepanning

  • Employing a totally new "Drag-Cut" principle, the cutter is drawn along the groove to be cut at a specific angle and perform without any vibration and without hooking.
  • The cutting-edge of the patented trepanning cutter is axially parallel to the centerline of the tool, but set in back of it.
  • Therefore, in the cutting process, the chips narrow down to a smaller size than the groove itself and perfect chip clearance is accomplished.
  • The chips are free to leave the groove
  • Good lubrication further helps the very smooth and highly effective cutting action


Sets come with body, standard tool holder, cobalt hole type cutter, pilot drill, allen wrench and special rule for quick positioning. Use optional extension toolholder to increase diameter.

trepanning-specs3.jpg

Cut holes in material up to 1-3/4" thick. Cut smooth, clean overlapping holes. Cut holes across the edge of material. Machine custom diameter discs in materials up to 3/8" thick.

Hole type cutters are designed to make a clean hole with minimum burr.




Disc type cutters create discs with clean edges and minimum burring.


Trepanning Tool for Mills, Drill Presses, Etc.

  • Ideally adaptable for fixed set-ups on production runs or repeat orders
  • Furnished complete with one Cobalt cutter 80-101-9, center drill, rule for easy diameter setting and allen wrench

Type 2000 Trepanning Tool

Item # Shank Capacity Cutter Size
80-005-2 MT 2 3/4 - 3" 5 mm
Type 2000