Dake Three Phase Dura-Press, FORCE 200 Ton
972017-2
Features:
- Double acting cylinder design with 5-part oil seals for smooth operation and a tight seal.
- Welded heavy steel plate frame for greater rigidity.
- 3 HP submerged motor drives 3 centrifugal pumps for quiet, steady oil flow (100 ton model).
- All electrical controls are low voltage (24V).
- Preset and factory-sealed relief valve to prevent exceeding pressure capacity.
- Ram has lifting eyes that attach a chain to hydraulically move the table.
- 2 HP submerged motor drives two centrifugal pumps for quiet, steady oil flow (40 & 70 ton models)
- Smooth, responsive control valve.
- Rapid advance of the ram to the workpiece - speed shifts automatically when contact is made.
Standard Equipment:
- Frame
- 2 Steel Table Plates
- Lifting Chain
- Cylinder
- Pressure Gauge
Specifications:
| Model | FORCE 200 |
| Item Number | 972017-2 |
| Capacity | 200 tons |
| Operation | Electric |
| Horsepower | 4 |
| Voltage | 220V/440V, 3-Phase |
| Width between uprights | 59" |
| Width between table channels | 14" |
| Minimum ram to table | 9” |
| Maximum ram to table | 35” |
| Ram travel | 19” |
| Screw Travel | n/a |
| Horizontal workhead travel | n/a |
| Footprint | 103" x 48" |
| Height | 114” |
| Weight | 8,467 lbs |
| Base | 103" x 48" |
| Ram advance speed | 47 ipm |
| Pressing speed | 7 ipm |
| RPM | n/a |
| Air Pressure | n/a |
Click to view the User's Manual
Click to view the Parts List
See all Dake Three Phase Dura-Presses
FORCE 200 Dura-Press - 200 Ton capacity
