Mitutoyo Absolute Digimatic Indicator ID-C Series 543 Bore Gage Application - 543-266B

Brand:

(No reviews yet) Write a Review
SKU:
543-266B

Mitutoyo


Mitutoyo Absolute Digimatic Indicator ID-C Series 543 - Specially Designed for Bore Gage Application

Features:

This ID-C Series Digimatic Indicators are exclusively designed for ID measurement.

  • The minimum value holding function provides the easy of detection of hole diameter.
  • An analog bar indicator is integrated to enhance the intuition in reading.
  • GO/±NG judgment is performed by setting the upper and lower tolerances.
  • Up to three sets of master value and upper/lower tolerance value can be memorized.
  • Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.

Technical Data

Accuracy: Refer to the list of specifications.
Resolution: 0.001mm or .00005”/0.001mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: SR44 (2 pcs.), 938882
Battery life: Approx. 2000 hours under normal use
Dust/Water protection level: IP42

Function

Origin-set/Preset, Zeroset, GO/±NG judgment,Power ON/OFF, Data output,inch/mm
conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error.

 

Absolute Digimatic Indicator ID-C Series 543 Model: ID-C112GE