Mitutoyo EV Counter Series 542 for Multi-Gage System - 542-063

Brand:

(No reviews yet) Write a Review
SKU:
542-063

Mitutoyo

Mitutoyo EV Counter Series 542 for Multi-Gage System - 542-063


Features:

  • Up to six gages can be connected to one unit, extendable up to 10 units (60 gages at maximum) using the RS Link function* to facilitate the configuration of a multi-point measurement system. * Refer to "Quick Guide to Precision Measuring Instruments" on page G-32 for details of the RS link.
  • A range of output modes to choose from: I/O output for tolerance judgment and segment output, BCD data output and RS-232C output are available.
  • Other than normal measurement, peak measurement or differential measurement between gages are available.


Function:

  • External Control (Zero-set, Preset etc.)
  • Direction switch
  • Error display
  • Tolerance judgment output
  • Diverse data output (RS-232C, BCD, Segment)
  • Peak measurement Maximum value, minimum value, runout, and differential measurement between two gages Addition, averaging, maximum value, minimum value, and maximum width


Optional Accessories:

  • D-EV External display unit: No.02ADD400
  • SPC cable (0.5m): No.02ADD950
  • SPC cable (1m): No.936937
  • SPC cable (2m): No.965014
  • AC adapter: No.02ADN460*
  • AC cable (USA): 02ZAA010*
  • Terminal connecting cable: No.02ADD930*
    * Included in package Order No.


LED display: 8 digits for parameter display (displays settings), 1 for error display
Error message: Overspeed, gage error etc.
External display: Dedicated external display unit D-EV (optional) can be connected.
Function of input switches: Measurement mode switching, parameter setting


Input/ output Tolerance judgment output 1 to 6 channels (L1, L2, L3), open-collector BCD output Parallel BCD output (positive/negative-true logic), open-collector Segment output Function to set on only the terminals corresponding to the counting values, open-collector Control output Normal operation signal (NOM), open-collector Control input Output channel designation (segment, in the BCD mode), presetting, peak value clear, range changeover (at segment output), holding counting value open-collector or no-voltage contact signal (with/without contact point).


Interface:

  • RS-232C:
    Measurement data output and control input
    EIA RS-232C-compatible Use cross cables for home position, DTE (terminal definition).


RS link:

  • Max. connecting unit: 10 (6 when using EF counter)
  • Connecting cable length: Max. 10m (sum of link cable length)
  • Data transfer time: 1sec./60ch (when transmission rate is 19200bps)


Rating:

  • Power supply voltage: 12 - 24V DC, terminal block (M3 screw)
  • Power consumption: 8.4W or less (700mA max.) Ensure at least 1A is available per unit.
  • Operating temperature:(humidity) range 0 to 40°C (RH 20 to 80%, no condensation)
  • Storage temperature:(humidity) range –10 to 50°C (RH 20 to 80%, no condensation)
  • External dimensions: 144 (W) x 72 (H) x 139 (D) mm


Specifications:

Order No 542-063
Package No.
(counter w/
AC adapter
64PKA137
Model EV-16P
Applicable input Differential square-wave
Applicable gage LGE, LGF, LGK, LGB, LGM, LG
not compatible with reference
point mark, sine wave output
type or 0.1µm resolution models
No of input channels 6
Resolution .000005, .00005, .0005" /
0.0005, 0.001, 0.005, 0.01mm
Mass 910g



See all Mitutoyo EV Counters Series 542 for Multi-Gage System



Model EV-16P for use with:

EV Counter, Model: EV-16P