Scotchman Dual Operator 135/220-24M Ironworker
Standard Features
- Dual operator allows for two operators to work at the same time at full capacity
- 135-ton punch station (1-11/16" in 1")
- Keyed punch ram for safety
- 12" Throat Depth
- Punch gauging table with fence and scale
- Die holders: 2", 2-1/2", and 3"
- Punch nut with wrench
- Adjustable swing-away stripper
- One round punch & die: max. diameter 1-1/4"
- Punch jog control
- Two electric remote foot pedals
- Two adjustable electric stroke controls with scale
- Two 2-stage hydraulic pumps
- Two valves
- Angle shear capacity: 6" x 6" x 1/2" at 90°
- Rectangle notcher 3" x 5-3/4" x 1/2"
- Notcher table with guides
- 220-ton, 24" flat bar shear with sabre blade
- Shear table with miter fence
- Tool table work area
- Slug receptacles
- Electrical box supplied with emergency palm button and lock-out tag-out accommodations
- 230/460 volt / 3-ph electrics (must specify voltage)
- All guards necessary to comply with ANSI B 11-5 standards
- Forklift accommodations
- Warranty: Three Years
- Made in the USA
- For Optional Standard Tooling please Contact Us
| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel |
| Punching Capacity | 135 ton 1-11/16" in 1" |
122 mt 43 mm in 25 mm |
| Special Tooling | 4" Max. Dia. | 100 mm Max. Dia. |
| Throat Depth | 12" | 300 mm |
| Flat Bar Shear (sabre blade-std.) |
220 ton, 24" Length 1" x 12" 3/4" x 20" 1/2" x 24" |
600 mm 25 x 300 mm 18 x 500 mm 12 x 600 mm |
| Angle Shear 90° Angle Shear 45° (with Bar Shear) |
6" x 6" x 1/2" 3" x 3" x 3/8" 4" x 4" x 1/2" |
150 x 150 x 12 mm 75 x 75 x 10 mm 100 x 100 x 12 mm |
| Brake 12" Brake 24" |
90 ton 70 ton |
81.6 mt 63.5 mt |
| Open End Brake | Max. 1/4" x 6" Flator Angle Iron |
6 mm x 150 mm |
| Pipe Notcher Schedule 40 |
3/4" 1" 1-1/4" 1-1/2" 2" |
19 mm 25 mm 32 mm 38 mm 50 mm |
| 90° V-Notcher | 6" x 6" x 5/16" | 150 mm x 150 mm x 8 mm |
| Rectangle Notcher | 3" x 5-3/4" x 1/2" | 75 mm x 145 mm x 12 mm |
| V-Notch | 3" x 3" x 1/2" | 75 mm x 75 mm x 12 mm |
| Notching in Leg of Channel | 6" to 10" | 150 mm to 250 mm |
| Channel Shear | 2" to 6" adj. | 50 mm to 150 mm |
| Rod Shear Round Rod (Max.) Square Rod (Max.) |
1/4" to 1-1/4", 9 Cavity 1/4" to 1", 1 Cavity |
6 mm to 32 mm 6 mm to 25 mm |
| Square Tube Shear | 1/2" to 2" 12 gauge |
12 mm to 50 mm 2.75 mm |
| PicketTool | 1/2" 3/4" 1" 16 gauge |
12 mm 19 mm 25 mm 1.6 mm |
| Offset Die Holder | Max. 40 ton | Max. 36 mt |
| Strokes per minute in light material | 1/4" stroke [Punch Station] | 20 spm |
| Strokes per minute in heavy material | 3/4" stroke [Punch Station] | 11 spm |
| Hydraulics | 3,500 psi | 241 bar |
| Motor Standard | 10 hp 3 ph 230/460 208/380/575 |
7.46 kW |
| Motor Optional | 10 hp 1 ph 230v |
7.46 kW |
| Dimensions | W-34" L-77-1/4" H-74 1/4" |
119 cm 174 cm 187 cm |
| Weight | 6,200 lbs. | 2,812 kg |
DO 135 Ton Punch Capacity, 220 Ton 24" Bar Shear
