Sharp-Industries 11.6" x 23.6" Automatic Surface Grinder - SH-1224
- 2-axis auto and manual down feed or 3-axes Auto with option of downfeed control
- 3HP Motor
- Spindle Speed 1,720 rpm
- 2-V Ways
- Extra Wide Bed
- Double Longitudinal “V” Ways and Cross “V” Ways
- Hydraulic Table (with Over Travel Protection)
- Auto Cross feed (Intermittent and Continuous Mode)
- Slide Ways are Hand Scraped and Turcite Coated
- Annealed Castings for Greater MachineS tability
- An Optional Programmable Spindle Downfeed System with User Friendly Control
Standard Equipment:
- Grinding Wheel 14” x 1.25” x 5”
- Auto Lube System
- 12 Gal Coolant System
- Wheel Adapter/Flange
- Wheel Balancing Arbor
- Grinding wheel balancing stand
- Diamond Dresser
- Splash guard both front and back ( not shown on photo
- Tool Kit includes: Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip screw driver, oil can, Grease Gun, Rear way cover bracket, Pin for indicator, Can of paint
| Model | SH-1224 |
| Table | |
| Working Surface W x L | 11.6" x 23.6" |
| Longitudinal Hydraulic Table Feed | 6.6-82 ipm |
| Feed | |
| Intermittent Cross Feed | 0.004-0.4 ipm |
| Continues Cross Feed | 39 ipm |
| Number of Graduations on Dial | 200 |
| Feed per Graduation | 0.0005" |
| Feed per Revolution | 0.1" |
| Rapid Down Feed (optional) | 18.9 ipm |
| Vertical Travel | |
| Number of Graduations | 500 |
| Feed per Graduation | 0.0001" |
| Feed per Revolution | 0.05" |
| Rapid Downfeed (optional) | 18.9 ipm |
| Wheel Size (OD x Width x ID) | 14" x 1.25" x 5" |
| Spindle Motor | 3 HP |
| Coolant System Motor | 1/8 HP |
| Weight | 4,000 lbs. |
| Dimensions | 76.8"L x 73.6"W x 71"H |
Sharp-Industries 11.6" x 23.6" Automatic Surface Grinder
