Kent 17" x 40" High Precision Engine Lathe with NEWALL DP-500 DRO - ML-1740T
Complete with Chuck Guard, 2-Speed Tailstock & NEWALL DP-500 Digital Readout Installed!
Features:
- 7.5 HP Spindle Motor, 12-Speeds
- 3.125” Spindle Through Hole
- Solid Full Length Casting Base with Front Loading Chip Tray for Easier Cleaning
- Adjustable Over-load Feed Clutches
- Quick Reversal Feed from Apron
- Full-length Safety Foot Brake
- Spindle Jog Button Control
- One-shot Lubrication for Apron, Carriage, and Bed Ways
- Multi-position Adjustable Feed Position Stops
- Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
- Dual Inch/Metric Dials with Quick-change Sleeve
Complete with:
- Face plate
- 10" 3-Jaw Chuck
- Chuck cover
- 4-Way Toolpost
- Toolbox with Tools
- Halogen Work Light
- Steady Rest & Follow Rest
- 3-position carriage stop
- Thread chasing dial
- Bed mount carriage stop
- Coolant System with Full Length Rear Splash Guard
- Manual and Parts List
Specifications:
| Model | ML-1740T |
| Swing Over Bed | 17" |
| Swing Over Cross Slide | 11" |
| Swing Over Gap | 24.5" |
| Width of Bed | 12" |
| Distance Between Centers | 44" |
| Cross Slide Travel | 12" |
| Top Slide Travel | 4.75" |
| Spindle Speeds | 12 |
| Spindle Speed Range | 36-1800 RPM |
| Through Hole Diameter | 3.125" |
| Spindle Nose | D1-6 |
| Spindle Bore Taper | MT#7 - MT#4 |
| Thread – Standard (Whit-worth) | 45 (2-72) TPI |
| Thread – Metric Pitch | 39 (0.2-14) mm |
| Longitudinal Feed | 0.0015"–0.04" in/rev |
| Cross Feed | 0.00075"–0.02" in/rev |
| Lead Screw Diameter | - |
| Threading Pitch | - |
| Quill Travel | 5" |
| Quill Diameter | 2.3" |
| Quill Bore Taper | MT#4 |
| Main Motor | 7.5 HP |
| Coolant Pump Motor | 1/8 HP |
| Machine Dimension | - |
| Packing Dimension | 88" x 42" x 66" |
| Machine weight | 3850 lbs. |
| Packing weight | 4510 lbs. |
Kent 17" x 40" High Precision Engine Lathe with NEWALL DP-500 Digital Readout
