Dake Hydraulic Press, Elec-Draulic II Dual Acting, 75 Ton
8-075
The 75 ton electric-hydraulic II dual acting press offers a ram pressing speed of 5 IPM, has a 2 horsepower motor, and 44 inches between the uprights. The dual acting ram allows for super-sensitive ram control with simple operation.
Features:
- Electric operation provides smooth, consistent pressing action.
- Variable ram speed allows fingertip control of ram movement for precise control.
- H-frame mounted control allows convenient control of press when workhead is out of operator’s reach.
- Adjustable table permits easy vertical movement by means of self-locking hoist.
- Double-acting cylinder permits pulling as well as pressing ram action
- Safety valve protects against overloads.
- T-ring seals prevent pressure loss.
Standard Equipment:
- Frame
- 2 Steel V-Blocks
- Flat Ram Nose
- Pump
- Safety Relief Valve
- Self-locking Table Hoist
- Double Acting Workhead
- 2 Steel Table Plates
- Pressure Gauge
Model Options:
- Traversing head
- Bolt Flange Adaptor
Specifications:
| Model | 8-075 |
| Manufacturer Number | 908075 |
| Capacity | 75 tons pressing 28 tons pulling |
| Operation | Electric |
| Horsepower | 2 |
| Voltage | 220V/440V, 3-Phase |
| Width between uprights | 44" |
| Width between table channels | 8-1/4" |
| Minimum ram to table | 7-5/8" |
| Maximum ram to table | 37-5/8" |
| Ram travel | 10" |
| Screw Travel | n/a |
| Horizontal workhead travel | n/a |
| Footprint | 55-1/2" x 36" |
| Height | 86" |
| Weight | 1,950 lbs |
| Base | 55-1/2" x 36" |
| Ram advance speed | n/a |
| Pressing speed | 5 ipm |
| RPM | 1,800 |
| Air Pressure | n/a |
75 ton Elec-Draulic II Press, 2HP Motor, 220/440-3 ph
