Wogaard Coolant Saver

Brand:

(No reviews yet) Write a Review

Wogaard

Wogaard Coolant Saver

The Coolant Saver Kit


Application - Reclaim coolant from Chip bin and return to machine


Typical Usage:

  • Soluble Coolant on machines with Conveyors
  • Neat oil up to 12cs on Sliding head low rated pumps


Kit Contains:

  • Coolant Saver Unit
  • Vacuum (Filtered) with 3m 6mm PU Hose *can be increased as much as 10 metres
  • 1metre - 12mm Hose Outlet
  • Fittings - 1/2' & 3/4' T & Straight fitting Kit
  • Full step by step Guide *Technical Support available
  • 1 Year Warranty


Features:

Up to 50% Coolant Saving

  • Reduce topping up

Swarf Value

  • Improved price for swarf without coolant

Up to 90% saving in disposal

  • Reduction in Disposal cost to remove coolant

Improved Housekeeping

  • No coolant collecting outside the machine or leaking on the floor

Manpower Reduction

  • No manual intervention to empty coolant in swarf bin as it is done automatically
  • Only swarf will require emptying from the bin

Environment

  • Not only recycling coolant but NO external power required or outside coolant leaks


Specifications:

Operating Pressure 1 to 45 Bar (not for use on higher pressure pumps)
Suction Capacity 0.5 to 0.8 bar (Valve control)
Collection Rate Approx. 1 Litre/min
Mounting Can be used on Floor, waist or head high pumps to approx. 3m Height
Collection Tube Length Vacuum Cup can be up to 10m from Coolant saver unit


Click to View Instruction Manual




Vacuum Heads:

Standard Top Mounted Vacuum Head - 144-2000

  • Supplied with Coolant Saver Kit (Part No. 144-1000)

Specifications:

  • Material - Stainless Steel
  • Diameter - 62.5mm (2.5")
  • Filter - Double filter plates/Metal - Micro Mesh
  • Top Mounted connector to 6mm Hose


Standard Top Mounted Vacuum Head & Check-Valve - 144-2000CV

  • Supplied with Oil Saver Kit (Part No. 145-1000)

- Recommended when collecting High Viscosity oil to reduce lost of oil in pipe when machine not in operation

Specifications:

  • Material - Stainless Steel
  • Diameter - 62.5mm (2.5")
  • Filter - Double filter plates/metal - Micro Mesh
  • Top Mounted connector to 6mm Hose


Wogaard Side Mounted Vacuum Head - 144-2000SM

  • Can be supplied instead of Top mounted Vacuum head (additional cost)

Specifications:

  • Material - Stainless Steel
  • Height - 30mm
  • Diameter - 62.5mm (2.5")
  • Filter - Double filter plates - Micro Mesh
  • Side Mounted connector to 6mm Hose


Vacuum Protector

The main reason for using the Vacuum Protector is to avoid having to pull the vacuum out of heavy swarf when removing bins to empty.

Specifications:

  • Material - Steel Fabrication with painted Black Finish
  • 80mm Square Profile x 660mm High
  • *750mm High version also available

Vacuum Protector with Clamp - 151-1001

  • Clamp to profile tube and grip over bin

Vacuum Protector without Clamp - 151-1000

  • Bolt hole available for fixed location in bin.