Nub Tools Master Jaw System for 5C & 16C Collets
Convert your CNC Lathe Chuck into a precision-length collet system!
The Master Jaw System is available for 6, 8, 10 and 12 inch CNC power chucks. A cost effective and efficient alternative to a standard collet chuck that eliminates the need to remove your chuck from the machine. This system provides a positive stop-dead length for repeatable part lengths. Installation is as fast and easy as installing a set of soft jaws.
The ability to go from working with standard jaws to running collets in just minutes will sky rocket your shop’s productivity. A TIR runout average of .0008 – .0015 in. can be expected above your collet’s factory tolerances and is dependent on the condition of your chuck and the quality of your collets. This amazing system is completely made in the USA from high grade materials. The system comes with a black oxide finish.
Features:
- Available for 6”, 8”, 10” & 12” CNC lathe chucks
- Eliminates the need to bore soft jaws for small work pieces
- 5C or 16C collet chucking
- Simple and quick Installation.
- Change over as fast as switching out soft jaws.
- Utilize abundant collets available for different stock sizes & shapes
- TIR runout average of .0008 – .0015”
- Reduce down time and increase profits
Kit Includes:
- 3 master jaws
- 1 collet sleeve
- 1 anti-backlash plug
- Operation and Setup instructions
Specifications:
Part # | 4720652-16C | 5510852-16C | 6301075-16C | 6301077-16C | 8271291-16C |
Collet Style | 16C | 16C | 16C | 16C | 16C |
Common Chuck Model Fitment (not limited to) | Strong NB-206 Samchully HH-206 | Strong N-208 Kitagawa B-208 Samchully HS-08 Atlas ATL8 | Strong | Samchully HS-10 | Strong N212 Kitagawa B212 Samchully HS12 |
Hole Spacing | 0.787" | 0.948" | 1.181" | 1.181" | 1.181" |
Groove Width | 0.472" | 0.551" | 0.630" | 0.630" | 0.827" |
Serrated Pitch | 1.5mm X 60 | 1.5mm X 60 | 1.5mm X 60 | 1.5mm X 60 | 1.5mm X 60 |
Chuck Size | 6" | 8" | 10" | 10" | 12" |
Chuck I.D. | 52mm | 52mm | 75mm | 77mm | 91mm |
Part # | 4720645-5C | 4720646-5C | 5510852-5C | 6301075-5C | 6301077-5C | 8271291-5C |
Collet Style | 5C | 5C | 5C | 5C | 5C | 5C |
Common Chuck Model Fitment (not limited to) | Strong | Samchully HS-06 | Strong | Strong N-210 Kitagawa B-210 | Samchully HS-10 | Strong |
Hole Spacing | 0.787" | 0.787" | 0.984" | 1.181" | 1.181" | 1.181" |
Groove Width | 0.472" | 0.472" | 0.551" | 0.630" | 0.630" | 0.827" |
Serrated Pitch | 1.5mm X 60 | 1.5mm X 60 | 1.5mm X 60 | 1.5mm X 60 | 1.5mm X 60 | 1.5mm X 60 |
Chuck Size | 6" | 6" | 8" | 10" | 10" | 12" |
Chuck I.D. | 45mm | 46mm | 52mm | 75mm | 77mm | 91mm |