KURT Sidewinder Vertical 2-1/2" Vise Brackets
SIDEWINDER™ VISE FOR 2nd OPERATION WORKHOLDING
to Mount with 6" & 8" VISES
The Kurt SideWinder is a vise that mounts vertically to the back of any Kurt 6” vise with an integral bracket. The bracket will include a stabilization leg that will mount to the table on the movable end of the vise and a workstop to position the height of the part.
Purpose: For doing 2nd op work holding the part vertically rather than horizontally.
Advantage:
- Saves set up time for 2nd op vertical work
- Machining can be done on both vises in the same setup
- Vise is at an elevated position which is more conducive to longer reach machining
- Has a stabilizer foot for vibration control
- Can be mounted to any Kurt industry standard 6" vise
- Has a round nut which controls deflection to a greater degree
- Does not interfere with the host vise
- Pull type vise
- AngLock design
Vise Features:
- Jaw width: 2.500"
- Jaw height: 1.063"
- Max. opening: 2.500"
- Max. clamping force: 2450 lbs.
Bracket Features:
- Adjustment range of workstop:0"-4.313"
- Hex size: 0.375"
- Overall bracket width: 14.000"
- Bracket height: 7.6"/8.4"
- Hex length: 0.453"
- Weight: 19 lbs.